2/3 Axis Digital Readout DRO Display OR Linear Scale CNC Milling Lathe Encoder
Axis Digital Readout&TTL Linear Scale. Application: lathe, grinding machine, milling machine, boring machine and EMD TOmake the position detection.
The sliding part adopts the five-bearing system which has been proved to be the most reliable and durable. The main grating adopts 90-degree assembly, which is more accurate and accurate. The repeatability of the measurement is more stable. The signal line adopts multi-layer isolation steel and metal soft shell protection, waterproof and anti-interference fine.
Ruler body with aluminum die-casting, hard chrome plating, corrosion-resistant. Dust bar with special plastic, corrosion resistance, scratch resistance, friction resistance. Parts individual, installation, maintenance, easy maintenance, waterproof, dust-proof good, long service life. The sensor uses a glass precision metrology grating as the measurement reference. Multi-function, easy to operate, reliable and durable, so that the necessary processing of mechanical products.
Accuracy class: ± 1um /. Measurement standards: engraved glass grating. Operating voltage: 5V ± 5% DC.
Working speed: 1m / S (1um). Grating pitch: 20um (0.020mm). Grating measurement system: transmission infrared optical measurement system, infrared wavelength 940nm. Anti-vibration: 50Hz-2KHz, 180m / s ². Impact: 16ms, 600m / s ².
Protection class: IP53 / IP64. Signal electrical connection: independent adapter cable (2.5M / 3M / 4M / 5M, 100M, can be connected to install the block). Note: The above parameters are measured in the ideal environment. There may be some differences in practical application. Physical length is differnt from the travel length 50/100,150,200,250,300,350,400,450,500, 550,600,650,700,750,800,850,900,950,1000mm 5um. Resolution: 5um (0.005mm) 0.0002. Signal: TTL square /wave EIA-442. Grating pitch: 0.02mm (50LP/min). Accuracy: ±0.005 mm or 0.0002 (at 20 deg C). Reference marks at interval of 50mm. Response Speed: 60m/min or 40ins/sec. Scale length above refers to the real travel of the linear scale. Actual physical length is 141mm longer than travel.One inch equuals to 25.4mm. Package Included(According to your choice). 1 x Axis Digital Readout. 1 x Set of brackets.
1 x bag of Screw. The item "2/3 Axis Digital Readout DRO Display OR Linear Scale CNC Milling Lathe Encoder" is in sale since Thursday, June 17, 2021. This item is in the category "Industrial\Electrical Equipment & Supplies\Other Electrical Equipment & Supplies". The seller is "freshmall3" and is located in Shenzhen.
This item can be shipped worldwide.- Type: Linear Scale
- MPN: lCn6883337
- Brand: Unbranded/Generic
- Measuring travel: 0-3020mm
- Measurement standards: engraved glass grating
- Operating voltage: 5V
- Grating pitch: 20um (0.020mm)
- Measurement procedure: Incremental
- Signal mode: TTL
- Circuit characteristics: NPN
- vibration: 50Hz-2KHz,
- Impact: 16ms,
- Protection class: IP53 / IP64
- Signal electrical connection: independent adapter cable (2.5M / 3M / 4M / 5M,
- Resolution: 5um (0.005mm) 0.0002
- Signal: TTL square /wave EIA-442
- Response Speed: 60m/min or 40ins/sec
- Axis: 2Axis / 3Axis
- Manufacturer Part Number: lCn6883337