2/3 Axis DRO Digital Readout Display TTL Linear Scale for Milling Lathe Machine

  
Axis Digital Readout&TTL Linear Scale Features: -Application: lathe, grinding machine, milling machine, boring machine and EMD TOmake the position detection. The sliding part adopts the five-bearing system which has been proved to be the most reliable and durable. The main grating adopts 90-degree assembly, which is more accurate and accurate. The repeatability of the measurement is more stable. The signal line adopts multi-layer isolation steel and metal soft shell protection, waterproof and anti-interference fine. Ruler body with aluminum die-casting, hard chrome plating, corrosion-resistant. Dust bar with special plastic, corrosion resistance, scratch resistance, friction resistance. Parts individual, installation, maintenance, easy maintenance, waterproof, dust-proof good, long service life. The sensor uses a glass precision metrology grating as the measurement reference. Multi-function, easy to operate, reliable and durable, so that the necessary processing of mechanical products. Accuracy class: ± 1um 3.

Measurement standards: engraved glass grating 4. Operating voltage: 5V ± 5% DC 5. Working speed: =1m / S (1um) 6.

Acceleration: = 60m / s² 7. Reference Operating Humidity: = 90RH 8. Grating pitch: 20um (0.020mm) 9. Grating measurement system: transmission infrared optical measurement system, infrared wavelength 940nm 13.

Anti-vibration: 50Hz-2KHz, = 180m / s ² 15. Impact: 16ms, = 600m / s ² 16. Displacement frictional resistance: = 5N 17. Protection class: IP53 / IP64 18. Signal electrical connection: independent adapter cable (2.5M / 3M / 4M / 5M, = 100M, can be connected to install the block).

Note: The above parameters are measured in the ideal environment. There may be some differences in practical application. Physical length is differnt from the travel length 50/100,150,200,250,300,350,400,450,500, 550,600,650,700,750,800,850,900,950,1000mm 5um. High Precision linear scale 3. Resolution: 5um (0.005mm) 0.0002 4.

Signal: TTL square /wave EIA-442 5. Grating pitch: 0.02mm (50LP/min) 6. Accuracy: ±0.005 mm or 0.0002 (at 20 deg C) 7.

Reference marks at interval of 50mm 8. Scale length above refers to the real travel of the linear scale. Actual physical length is 141mm longer than travel. One inch equuals to 25.4mm.

1 x Axis Digital Readout 1 x Set of brackets 1 x Cable 1 x User manual. 1 x Linear Scale 1 x L plate 1 x Bracket 1 x bag of Screw. The item "2/3 Axis DRO Digital Readout Display TTL Linear Scale for Milling Lathe Machine" is in sale since Sunday, October 27, 2019. This item is in the category "Business, Office & Industrial\Industrial Tools\Measuring Tools\Other Measuring Tools". The seller is "allfan" and is located in HK.

This item can be shipped to United Kingdom.

• MPN: Does not apply
• Brand: Unbranded